The N-EVENT-REPORT-RQ Message contains fields as defined in Table 10.3-1. Each field shall conform to DICOM encoding and Value Representation as defined in PS 3.5. Fields are required as specified in the N-EVENT-REPORT service definition unless otherwise noted in Table 10.3-1. Fields not specified in the N-EVENT-REPORT service definition but present in Table 10.3-1 are required by the DIMSE-N protocol.
Table 10.3-1N-EVENT-REPORT-RQ MESSAGE FIELDS
|Message Field||Tag||VR||VM||Description of Field|
|Command Group Length||(0000,0000)||UL||1||The even number of bytes from the end of the value field to the beginning of the next group.|
|Affected SOP Class UID||(0000,0002)||UI||1||SOP Class UID of the SOP Instance for which this event occurred.|
|Command Field||(0000,0100)||US||1||This field distinguishes the DIMSE-N notification conveyed by this Message. The value of this field shall be set to 0100H for the N-EVENT-REPORT-RQ Message.|
|Message ID||(0000,0110)||US||1||Implementation-specific value which distinguishes this Message from other Messages.|
|Command Data Set Type||(0000,0800)||US||1||This field indicates if a Data Set is present in the Message. This field shall be set to the value of 0101H if no Data Set is present; any other value indicates a Data Set is included in the Message.|
|Affected SOP Instance UID||(0000,1000)||UI||1||Contains the UID of the SOP Instance for which this event occurred.|
|Event Type ID||(0000,1002)||US||1||Values for this field are application-specific.|
|Event Information||(no tag)||⎯||⎯||Application-specific Data Set containing additional information related to the operation.|
Notes: 1. Service Class Specifications contained in PS 3.4 defines the values needed for the Event Type ID parameter.
2. Service Class Specifications contained in PS 3.4 defines the Data Set needed for the Event Information parameter.